Ce dont vous avez besoin
-
-
-
Slide and click the battery latch release.
-
Slide the battery out of the battery bay.
Demander à FixBot
-
-
-
-
-
-
Loosen the eight captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.
-
-
-
-
-
Use your fingertips to carefully spread apart the securing clips on each end of the memory module connector until the module pops up.
-
Remove the module from the connector.
-
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
Équipe
RampUP America, Inc. Membre de l'équipe RampUP America, Inc.
Community
45 membres
8 863 tutoriels rédigés
