Introduction

This guide shows you how to access the speaker of your phone, the component which produces sound.

Pièces

Aucune pièce nécessaire.

Make sure your phone is turned off.
  • Make sure your phone is turned off.

Ajouter un commentaire

Press the button on the back of the phone and slide the back panel off.
  • Press the button on the back of the phone and slide the back panel off.

  • Remove the battery by pulling it from the phone.

Ajouter un commentaire

  • Note the small metal frame that hold the SIM card into place.

  • Gently pull back the tab and lift open the frame.

Ajouter un commentaire

  • Retrieve your SIM card.

Ajouter un commentaire

  • Separate the front cover from the main body of the phone.

  • Set the front cover, as indicated, aside.

Ajouter un commentaire

  • Remove the screws on the phone in the order of the colors of the rainbow (Red, Orange, Yellow, Green, Blue, Purple) with a Torx T6 screwdriver.

  • Removing the screws in this order prevents any unnecessary torsion on the circuit board. Be sure to remove the screws in the order indicated.

Ajouter un commentaire

  • Pull the screen assembly from the base of the phone.

  • Set the base of the phone, as indicated, aside.

Ajouter un commentaire

  • Carefully lift the keypad portion of the screen assembly from the circuit board.

Ajouter un commentaire

  • Separate the screen from the circuit board.

  • Note the components circled in orange. These will need to be reconnected during reassembly in order for the screen to function.

  • Set the circuit board, as indicated, aside.

  • Remember to reconnect the screen to the circuit board when reassembling!

Ajouter un commentaire

  • Gently push down on the screen to pop it off of the assembly.

Ajouter un commentaire

  • When the screen falls out the assembly, two white tabs will fall out with it.

  • When reinstalling the screen, insert the tabs with the slanted side pointing upwards so they slide into the assembly.

Ajouter un commentaire

  • Set the screen and the tabs aside.

Ajouter un commentaire

  • You can now access the speaker.

  • Note the tab on the end of the speaker. It must be placed in correctly in order to reinstall the speaker.

Ajouter un commentaire

  • Remove the speaker from the assembly.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sterling Fuentes

Membre depuis le 09/04/2010

61 Réputation

8 tutoriels rédigés

Équipe

Cal Poly, Team 29-64, Johann Spring 2010 Membre de l'équipe Cal Poly, Team 29-64, Johann Spring 2010

CPSU-JOHANN-S10S29G64

3 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 997