Introduction

This guide details the removal of the DVD-ROM from the disc drive tray.

Pièces

Aucune pièce nécessaire.

Pull on outer latch.
  • Pull on outer latch.

  • Lower door until it is level with your work surface.

  • Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.

Ajouter un commentaire

Removing the faceplate.
  • Removing the faceplate.

    • On the inside of the case, find the two plastic tabs.

    • While depressing the tabs, remove the faceplate by pulling and rotating outward.

Ajouter un commentaire

  • Remove the two screws on the front of the drive with the Phillips #1 screwdriver.

Ajouter un commentaire

  • Pull the drive out to allow access to the power and ribbon cables. Do not fully remove.

  • Remove both the power and ribbon cable.

Ajouter un commentaire

  • Remove DVD drive from the drive bay.

    • Lift the two metal tabs on the back of the shielding and remove.

    • Remove the four screws on the bottom of the drive with the Phillips #1 screwdriver.

    • Slide out DVD drive.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

9 autre(s) ont terminé cette réparation.

Stephen Scruggs

Membre depuis le 20/01/2010

2 017 Réputation

2 tutoriels rédigés

Équipe

Cal Poly, Team 13-24, Maness Winter 2010 Membre de l'équipe Cal Poly, Team 13-24, Maness Winter 2010

CPSU-MANESS-W10S13G24

4 membres

13 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 11

Total : 9,368