Aller au contenu principal

HP 14-fq1025nr Heat Sink Replacement

Ce dont vous avez besoin

  1. HP 14-fq1025nr Heat Sink Replacement, Back Cover: étape 1, image 1 de 1
    • Flip the laptop upside down so the bottom cover is facing up.

  2. HP 14-fq1025nr Heat Sink Replacement: étape 2, image 1 de 1
    • Use a pair of tweezers to grab and pull the feet off of the cover.

  3. HP 14-fq1025nr Heat Sink Replacement: étape 3, image 1 de 1
    • Remove the two 4 mm screws using a Phillips #0 screwdriver.

    • Remove the six remaining 6 mm screws located around the edges and underneath the feet using a Phillips #0 screwdriver.

  4. HP 14-fq1025nr Heat Sink Replacement: étape 4, image 1 de 1
    • Flip the laptop right-side up and slide an iFixit opening tool and/or Jimmy inside of the bottom cover seam to pry it open.

  5. HP 14-fq1025nr Heat Sink Replacement: étape 5, image 1 de 1
    • Remove the bottom cover.

  6. HP 14-fq1025nr Heat Sink Replacement, Fan: étape 6, image 1 de 1
    • Remove the three silver screws (one 2 mm screw and two 4 mm screws) holding down the fan using a Phillips #0 screwdriver.

  7. HP 14-fq1025nr Heat Sink Replacement: étape 7, image 1 de 1
    • Unplug the fan’s power cord from the motherboard.

    • Use tweezers to pull the plug out, if needed.

  8. HP 14-fq1025nr Heat Sink Replacement: étape 8, image 1 de 1
    • Remove the fan.

  9. HP 14-fq1025nr Heat Sink Replacement, Heat Sink: étape 9, image 1 de 1
    • Remove the four gray 3 mm screws around the heat sink using a Phillips #0 screwdriver.

    • Remove the heat sink.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Kristen Gismondi

Membre depuis le 11/12/14

81 931 Réputation

200 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Staff

135 membres

17 163 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 12

Total : 54