Introduction
Use this guide to replace a key or or multiple keys in your Kano Computer Kit Complete keyboard. The keyboard is a piece of hardware that allows you to type and enter commands to your computer. A key may need to be replaced when a key breaks or if a key is no longer working properly. In some cases, your keyboard key may not work when pressed. This guide only requires a 1mm flat head screwdriver. Be careful when removing keys as some could be a choking hazard. Any further questions can be answered by going to Kano’s Help site.
Ce dont vous avez besoin
-
-
Use your 1mm flathead to pop the key off. Make sure the flathead is all the way under the key so you can get good leverage.
-
-
To reassemble your device, press the key back into place.
To reassemble your device, press the key back into place.
Annulation : je n'ai pas terminé ce tutoriel.
2 autres ont terminé cette réparation.
Équipe
Embry-Riddle Aeronautical University, Team S1-G4, Watkins Fall 2019 Membre de l'équipe Embry-Riddle Aeronautical University, Team S1-G4, Watkins Fall 2019
ERAU-WATKINS-F19S1G4
4 membres
10 tutoriels rédigés
