Kindle Paperwhite 2nd Generation Motherboard Replacement

Introduction

Disassembling a tablet often requires some gentle prying of the frame. Be sure to exercise care during these first few steps(disassembling), and do not lose your screws! The Paperwhite is a sturdy tablet that can be broken down into just a few components. This guide will show you in just eight steps how to replace a faulty motherboard.

Ce dont vous avez besoin

Étape 1 Battery

Kindle Paperwhite 2nd Generation Motherboard Replacement, Battery: étape 1, image 1 de 2

Kindle Paperwhite 2nd Generation Motherboard Replacement, Battery: étape 1, image 2 de 2

Insert plastic opening tool into the corners of the Paperwhite and slide around the edge perimeter to remove bezel.
Be sure to begin prying along the outer edges , these are the optimal points for removing the bezel.
Be careful and do not slide prying tool deeper than 3-4 mm under the side bezel or you could peel off screen protector film.

Traduire

Étape 2

Using a Screw Driver, Remove the eleven 3.2 mm Phillips 000 screws from corners of the mid-frame and from behind the black strip as shown.
Do not forget the screw in the middle of the black adhesive strip.

Traduire

Étape 3

Carefully remove the mid-frame from the back cover.

Traduire

Étape 4

Use a screwdriver to remove the three 3.0 mm Phillips 000 screws that are holding the battery in place as shown.

Traduire

Étape 5

Carefully lift the battery and remove it from the device.

Traduire

Étape 6 Motherboard

Kindle Paperwhite 2nd Generation Motherboard Replacement, Motherboard: étape 6, image 1 de 2

Kindle Paperwhite 2nd Generation Motherboard Replacement, Motherboard: étape 6, image 2 de 2

Use a screwdriver to remove the seven 3.0 mm Phillips 000 screws that are holding the motherboard in place as shown.
Don't lose the washer that is highlighted with an orange marker as shown. It is a necessary component to protect the screw.

Traduire