Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

This guide will walk you through the process of replacing the back cover of the Kodak Signet 35.

  1. While the lens is facing away from you, there is a button at the center of the latch on the right side. Press this button with your finger and slide the latch downward. This will disengage the latch, opening the back of the camera. While the lens is facing away from you, there is a button at the center of the latch on the right side. Press this button with your finger and slide the latch downward. This will disengage the latch, opening the back of the camera. While the lens is facing away from you, there is a button at the center of the latch on the right side. Press this button with your finger and slide the latch downward. This will disengage the latch, opening the back of the camera.
    • While the lens is facing away from you, there is a button at the center of the latch on the right side. Press this button with your finger and slide the latch downward. This will disengage the latch, opening the back of the camera.

  2. Open the back cover and it will unhitch on the left.
    • Open the back cover and it will unhitch on the left.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Christopher Negron

Membre depuis le 11/09/2016

113 Réputation

1 tutoriel rédigé

Équipe

USF Tampa, Team 6-3, Remmell Fall 2016 Membre de l'équipe USF Tampa, Team 6-3, Remmell Fall 2016

USFT-REMMELL-F16S6G3

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 214