Aller au contenu principal

Introduction

Prereq to disconnect the battery.

Outils

Pièces

Aucune pièce spécifiée.

  1. In this step you will disconnect the battery to help avoid shorting out any components during service. Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board.
    • In this step you will disconnect the battery to help avoid shorting out any components during service.

    • Use the flat end of a spudger to pry both short sides of the battery connector upward to disconnect it from its socket on the logic board.

    • Bend the battery cable slightly away from the logic board so the connector will not accidentally bend back and make contact with its socket.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Sam Goldheart

Membre depuis le 18/10/2012

448 075 Réputation

547 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Community

145 membres

17 060 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 51