Introduction

This guide will teach you how to remove the device's fingerprint sensor.

Position the opening tool under the lid of the screen. Slide the opening tool around the edge of the screen to loosen the adhesive.
  • Position the opening tool under the lid of the screen.

  • Slide the opening tool around the edge of the screen to loosen the adhesive.

Ajouter un commentaire

Lift the screen off the body  from the top.
  • Lift the screen off the body from the top.

Ajouter un commentaire

To disconnect the screen from the body, stick the spudger under one of the corners of the gold tab. Lift up, removing the tab from the device.
  • To disconnect the screen from the body, stick the spudger under one of the corners of the gold tab.

  • Lift up, removing the tab from the device.

Ajouter un commentaire

Pull the screen up to fully remove it.
  • Pull the screen up to fully remove it.

Ajouter un commentaire

Insert the tweezers under the metal backing of the sensor. Lift up the backing until it is detached from the phone.
  • Insert the tweezers under the metal backing of the sensor.

  • Lift up the backing until it is detached from the phone.

Ajouter un commentaire

With the tweezers, grab the black connector located just above the fingerprint scanner. Pull the connector to the right until it is detached from the phone.
  • With the tweezers, grab the black connector located just above the fingerprint scanner.

  • Pull the connector to the right until it is detached from the phone.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Miriam Lam

Membre depuis le 24/01/2018

609 Réputation

5 tutoriels rédigés

Équipe

Cal Poly, Team S2-G2, Livingston Winter 2018 Membre de l'équipe Cal Poly, Team S2-G2, Livingston Winter 2018

CPSU-LIVINGSTON-W18S2G2

4 membres

5 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 41

Total : 243