Introduction

If the device is not tracking motion properly this could be due to a broken camera motherboard. Common causes for motherboard failure include being exposed to static shock, overheating, or component failure.

Remove the filter from the camera as shown.
  • Remove the filter from the camera as shown.

Ajouter un commentaire

Remove the cover plate from the front face of the camera using the iFixit Opening Pick.
  • Remove the cover plate from the front face of the camera using the iFixit Opening Pick.

Ajouter un commentaire

  • Remove the two 3/16" J #000 screws.

  • Lift the back plate off.

Ajouter un commentaire

  • Gently tug on the wires to free them from the motherboard.

Ajouter un commentaire

  • Remove the four 3/16" Phillips #000 from the four corners of the motherboard.

  • Remove the two 1/4" Phillips #0 screws shown to release the motherboard from the enclosure.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Anthony Vasquez

Membre depuis le 22/01/2015

162 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 18-5, Maness Winter 2015 Membre de l'équipe Cal Poly, Team 18-5, Maness Winter 2015

CPSU-MANESS-W15S18G5

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 1

Total : 466