Aller au contenu principal

Introduction

The front case of the Omaker M4 provides a protective layer for the speaker cone. Once the front case is removed, the speaker can be accessed.

Pièces

Aucune pièce spécifiée.

  1. Flip the device over so the front of the device is facing upwards. Make sure to place the speaker on a flat surface
    • Flip the device over so the front of the device is facing upwards. Make sure to place the speaker on a flat surface

  2. Use a T6 Torx Screwdriver to remove the four screws from the front of the device. Use a T6 Torx Screwdriver to remove the four screws from the front of the device.
    • Use a T6 Torx Screwdriver to remove the four screws from the front of the device.

  3. Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now

    Fix Kits pour batteries d'iPhone

    Seulement $29.99

    Buy Now
  4. Use a magnet to remove the screws after unscrewing them and place them aside.
    • Use a magnet to remove the screws after unscrewing them and place them aside.

  5. Carefully remove the front case by gently pulling it from the body of the device. Carefully remove the front case by gently pulling it from the body of the device.
    • Carefully remove the front case by gently pulling it from the body of the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

3 autre(s) ont terminé cette réparation.

Andrew Entwistle

Membre depuis le 17/02/2016

679 Réputation

4 tutoriels rédigés

Équipe

USF Tampa, Team 2-2, Sullivan Spring 2016 Membre de l'équipe USF Tampa, Team 2-2, Sullivan Spring 2016

USFT-SULLIVAN-S16S2G2

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 2

Total : 459