Aller au contenu principal

Introduction

Removing the motherboard from the device is fairly simple. However, be careful not to remove the motherboard without removing the three screws and the wires from the speaker and microphone.

  1. Flip the device over so the front of the speaker is facing down. Make sure to place the speaker on a flat surface
    • Flip the device over so the front of the speaker is facing down. Make sure to place the speaker on a flat surface

  2. Use a T6 Torx screwdriver to remove the four 9mm screws from the back of the device. Use a T6 Torx screwdriver to remove the four 9mm screws from the back of the device.
    • Use a T6 Torx screwdriver to remove the four 9mm screws from the back of the device.

  3. Use a magnet to remove the screws after unscrewing them and place them aside. Use a magnet to remove the screws after unscrewing them and place them aside.
    • Use a magnet to remove the screws after unscrewing them and place them aside.

  4. Carefully remove the back cover without breaking the battery wire.
    • Carefully remove the back cover without breaking the battery wire.

  5. Fix Kits pour Android

    A new screen or battery is one kit away.

    Acheter maintenant

    Fix Kits pour Android

    A new screen or battery is one kit away.

    Acheter maintenant
  6. Remove the end of the battery connection from the motherboard by holding the end of the wire and carefully pulling it out of the socket using tweezers. The battery is still attached to the back cover.
    • Remove the end of the battery connection from the motherboard by holding the end of the wire and carefully pulling it out of the socket using tweezers.

    • The battery is still attached to the back cover.

  7. Remove the mic wire by carefully pulling the plug out of the socket. Remove the mic wire by carefully pulling the plug out of the socket.
    • Remove the mic wire by carefully pulling the plug out of the socket.

  8. Remove the speaker wire by carefully pulling the plug out of the socket on the motherboard.
    • Remove the speaker wire by carefully pulling the plug out of the socket on the motherboard.

  9. Use Phillips PH00 screwdriver to remove the three screws holding the motherboard in place. Use Phillips PH00 screwdriver to remove the three screws holding the motherboard in place.
    • Use Phillips PH00 screwdriver to remove the three screws holding the motherboard in place.

  10. Remove the screws using the screwdriver. Since the screws that hold the motherboard in place are smaller, the screwdriver is able to pick them up.
    • Remove the screws using the screwdriver.

    • Since the screws that hold the motherboard in place are smaller, the screwdriver is able to pick them up.

  11. Carefully remove the motherboard with your hand by lifting it from the device. Carefully remove the motherboard with your hand by lifting it from the device.
    • Carefully remove the motherboard with your hand by lifting it from the device.

Conclusion

To reassemble your device, follow these instructions in reverse order.

2 autre(s) ont terminé cette réparation.

Andrew Entwistle

Membre depuis le 17/02/2016

679 Réputation

4 tutoriels rédigés

Équipe

USF Tampa, Team 2-2, Sullivan Spring 2016 Membre de l'équipe USF Tampa, Team 2-2, Sullivan Spring 2016

USFT-SULLIVAN-S16S2G2

4 membres

6 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 4

30 derniers jours : 14

Total : 880