Introduction

This guide will lead you through the steps necessary to access the screen's components as well as how to assure it is properly connected.

Pièces

Aucune pièce nécessaire.

  1. Flip the device over
    • Flip the device over

    Ajouter un commentaire

  2. Unscrew the 2 screws closest to the screen
    • Unscrew the 2 screws closest to the screen

    Ajouter un commentaire

    • Flip the device back over

    • It is now standing right side up

    Ajouter un commentaire

    • Unscrew the top.

    Ajouter un commentaire

    • Take the top of the device off.

    Ajouter un commentaire

    • Unscrew the button board.

    Ajouter un commentaire

    • Take off the button board.

    Ajouter un commentaire

    • Unscrew all visible screws on the black logic board cover.

    Ajouter un commentaire

    • Lift the screen straight up out of the device.

    Ajouter un commentaire

    • Check that the single input plug from the logic board to the screen (reverse side) is completely pushed in by pressing it firmly into the socket.

    • Also check that the 2 output plugs from the screen to the logic board are completely pushed in by pressing them firmly into the highlighted sockets.

    • You have successfully reconnected your display screen.

    Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Nick Sherman

Membre depuis le 26/09/2012

31 Réputation

1 tutoriel rédigé

Équipe

Cal Poly, Team 7-50, Forte Fall 2012 Membre de l'équipe Cal Poly, Team 7-50, Forte Fall 2012

CPSU-FORTE-F12S7G50

5 membres

8 tutoriels rédigés

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 345