Aller au contenu principal

Introduction

Also known as Xperia Z LT36i, Xperia C6603, Xperia C6602, Xperia Z LTE, Xperia Z HSPA+

How to change broken, not working Digitizer or Display.

This procedure is very hard. You must have experience to do this.


Please SUBSCRIBE to my channel ツ

Vidéo d'introduction

  1. Warm the Battery cover before disassemble it. Warm the Battery cover before disassemble it. Warm the Battery cover before disassemble it.
    • Warm the Battery cover before disassemble it.

  2. 'Carefully' warm the battery too 'Carefully' warm the battery too 'Carefully' warm the battery too
    • 'Carefully' warm the battery too

  3. Unscrew 4x screws and disconnect 3x flex cables in case to free the mother board. Unscrew 4x screws and disconnect 3x flex cables in case to free the mother board. Unscrew 4x screws and disconnect 3x flex cables in case to free the mother board.
    • Unscrew 4x screws and disconnect 3x flex cables in case to free the mother board.

  4. Fix Kits pour Android

    Remplacer l'écran ou la batterie est à portée de kit !

    Acheter maintenant

    Fix Kits pour Android

    Remplacer l'écran ou la batterie est à portée de kit !

    Acheter maintenant
  5. This are: main Camera, front Camera and antenna wire Flex cable. Now we can remove the Motherboard. Now we can remove the Motherboard.
    • This are: main Camera, front Camera and antenna wire Flex cable.

    • Now we can remove the Motherboard.

  6. The Headphone connector and the Ringer / Cover / Signal Antenna module. The Headphone connector and the Ringer / Cover / Signal Antenna module. The Headphone connector and the Ringer / Cover / Signal Antenna module.
    • The Headphone connector and the Ringer / Cover / Signal Antenna module.

  7. Disconnect the LCD light flex cable by lifting up the black plastic and removing the flex cable from the right side and we are ready to go. Disconnect the LCD light flex cable by lifting up the black plastic and removing the flex cable from the right side and we are ready to go. Disconnect the LCD light flex cable by lifting up the black plastic and removing the flex cable from the right side and we are ready to go.
    • Disconnect the LCD light flex cable by lifting up the black plastic and removing the flex cable from the right side and we are ready to go.

  8. Warm the Touch screen before you start to disassemble it. Warm the Touch screen before you start to disassemble it. Warm the Touch screen before you start to disassemble it.
    • Warm the Touch screen before you start to disassemble it.

  9. Let's assemble the new spare part. Let's assemble the new spare part. Let's assemble the new spare part.
    • Let's assemble the new spare part.

  10. All's well, that ends well. :) . Did you do it successfully?
Conclusion

To reassemble your device, follow these instructions in reverse order.

76 autre(s) ont terminé cette réparation.

ZFix

Membre depuis le 09/12/2013

167 315 Réputation

305 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

290 membres

824 tutoriels rédigés

54 commentaires

Same procedure with Sony Xperia Z2?

Fredrik - Réponse

How do you warm it? With what and what temperature ?

Jeroen - Réponse

with a hairdryer for like 3 min on high

Peter Tembo -

With hair dryer.

ZFix - Réponse

Same procedure with Sony Xperia Z1? Where do i get the screen parts?

chrgro - Réponse

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 11

7 derniers jours : 41

30 derniers jours : 168

Total : 230,025