Introduction
This guide will teach you how to disassemble your TomTom One XL and expose the power button for cleaning or repair.
Ce dont vous avez besoin
-
-
Using the palate knife tool, pry the back from the LCD screen. Apply a moderate pressure to separate them.
-
-
-
After prying both halves apart, they will be connected by two wires.
-
Carefully set the two halves next to each other making sure not to stress or damage the wires.
-
-
-
Outil utilisé dans cette étape :Tweezers$4.99
-
Using the tweezers separate the wires connecting the battery and speaker to the mother board.
-
-
-
Using a Torx 6 screwdriver, remove the 4 .5mm screws connecting the motherboard to the screen assembly.
-
-
-
Detach the ribbon wire from it's port on the back of the motherboard.
-
-
-
Now the power button is exposed and any obstructions can be easily removed.
-
Demander à FixBot
To reassemble your device, follow these instructions in reverse order.
Équipe
Colorado Springs, Team 9-6, Panko Spring 2015 Membre de l'équipe Colorado Springs, Team 9-6, Panko Spring 2015
UCCS-PANKO-S15S9G6
3 membres
5 tutoriels rédigés
