Introduction
The following steps show you the basics to opening up the device.
Ce dont vous avez besoin
-
-
Remove the cover over the Micro SD outlet by using a plastic opening tool to pry open and push out the cover panel.
Demander à FixBot
-
-
-
Remove the two 4-mm #0 screws from the inside of the Micro SD compartment.
-
-
-
-
Insert blue guitar picks in the crease between the top and bottom panels starting on the same end as the Micro SD slot.
-
-
-
Insert the black spudger between the guitar picks in order to pry open gaps between the blue guitar picks.
-
As the gaps open, slide the guitar picks along the sides to separate the panels.
-
-
-
Pry all four sides apart using the blue guitar picks and the black spudger until they can easily be pried apart by hand.
-
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
8 autres ont terminé cette réparation.
Équipe
IUPUI, Team 2-1, Baechle Fall 2015 Membre de l'équipe IUPUI, Team 2-1, Baechle Fall 2015
IUPUI-BAECHLE-F15S2G1
3 membres
3 tutoriels rédigés
