Introduction
The back panel located on the underside of the burner and is held in place by multiple screws. Take care when removing the screws as it may require a good amount of force if the panel has never been removed.
Ce dont vous avez besoin
-
-
Remove the screws on the back panel with the #1 Phillips screwdriver bit.
-
The screws in the rubber legs of the burner do not need to be removed.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Annulation : je n'ai pas terminé ce tutoriel.
Une autre personne a terminé cette réparation.