Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Introduction

This guide shows how to safely use iFixit’s adhesive remover.

  1. iFixit adhesive remover contains acetone, a mild skin and eye irritant. Wear eye protection when handling and applying the adhesive remover. (Eye protection is included in your kit.)
    • iFixit adhesive remover contains acetone, a mild skin and eye irritant.

    • Wear eye protection when handling and applying the adhesive remover. (Eye protection is included in your kit.)

    • Do not wear contact lenses without eye protection.

    • Protective gloves are also included in your kit. If you are concerned about possible skin irritation, put your gloves on now.

  2. Pull off the black rubber stopper from your bottle of adhesive remover. Twist to loosen or remove the bottle cap before you cut the applicator tip. This unseals the bottle and allows the pressure to equalize before you cut the applicator tip. If you skip this step, the adhesive remover may spray out unexpectedly when the tip is cut.
    • Pull off the black rubber stopper from your bottle of adhesive remover.

    • Twist to loosen or remove the bottle cap before you cut the applicator tip.

    • This unseals the bottle and allows the pressure to equalize before you cut the applicator tip. If you skip this step, the adhesive remover may spray out unexpectedly when the tip is cut.

    • Use scissors to cut off the sealed tip of the applicator.

    • Cutting close to the narrow tip will give you better control so you can apply the adhesive remover in small amounts.

    • Twist and close the bottle cap securely before you proceed further.

Ligne d'arrivée

Arthur Shi

Membre depuis le 03/01/2018

150 041 Réputation

400 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Community

133 membres

14 606 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 7

7 derniers jours : 46

30 derniers jours : 186

Total : 1,130