Introduction

Prereq only guide

Remove the two T8 Torx screws securing the upper bracket to the hard drive.
  • Remove the two T8 Torx screws securing the upper bracket to the hard drive.

  • Remove the upper bracket from the hard drive.

Ajouter un commentaire

Remove the two T8 Torx pins from the other side of the hard drive.
  • Remove the two T8 Torx pins from the other side of the hard drive.

Ajouter un commentaire

  • Carefully peel off the piece of EMI foam attached to the front of the hard drive.

  • Don't forget to transfer this to your new hard drive.

Ajouter un commentaire

Conclusion

To reassemble your device, follow these instructions in reverse order.

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 21

7 derniers jours : 108

30 derniers jours : 411

Total : 1,186