Aller au contenu principal

Introduction

Prerequisite only guide. Shows how to swing open the Display Assembly for the iPad Pro 9.7"

Pièces

Aucune pièce spécifiée.

  1. Use picks to ensure most of the adhesive has been cut through on the top, left, and bottom sides. Twist the top and bottom picks to separate the display assembly from the rear case. Do not attempt to remove the display—it is still attached to the rear case.
    • Use picks to ensure most of the adhesive has been cut through on the top, left, and bottom sides.

    • Twist the top and bottom picks to separate the display assembly from the rear case.

    • Do not attempt to remove the display—it is still attached to the rear case.

  2. Swing the display assembly towards the right of the case, using the right edge as a hinge. As you move the display assembly, make sure that the display ribbon cable is not being stressed. Continue swinging the display assembly until it lays flat next to the rear case.
    • Swing the display assembly towards the right of the case, using the right edge as a hinge.

    • As you move the display assembly, make sure that the display ribbon cable is not being stressed.

    • Continue swinging the display assembly until it lays flat next to the rear case.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Arthur Shi

Membre depuis le 03/01/2018

80 491 Réputation

262 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Community

107 membres

9 591 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 1

Total : 20