Aller au contenu principal

光驱移除

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 20 tutoriels qui comprennent cette étape.

Anglais
Chinois

Traduction de l’étape 4

Étape 4
Optical Drive Removal, Remove the vibration isolator: étape 0, image 1 de 3 Optical Drive Removal, Remove the vibration isolator: étape 0, image 2 de 3 Optical Drive Removal, Remove the vibration isolator: étape 0, image 3 de 3
Remove the vibration isolator
  • Lift up the optical drive's vibration isolator to remove it.

  • The vibration isolator grips the sides of the optical drive with silicone pads, so you may need to "walk" the isolator off of the drive to slip it off each side.

  • During reassembly, ensure the vibration isolator is pushed down and around both edges of the optical drive, so it sits flush with the rest of the center chassis.

提起光驱的振动隔离器将其卸下。

振动隔离器用硅胶垫夹住光驱的侧面,因此你可能需要将隔离器从驱动器上“走动”以将其从每一侧滑落。

在重新组装期间,确保将隔振器向下推并围绕光驱的两个边缘,使其与中心机箱的其余部分齐平。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.