Aller au contenu principal

Sony WH-1000XM4 バッテリーの交換

Anglais
Japonais

Traduction de l’étape 9

Étape 9
Sony WH-1000XM4 Battery Replacement, Remove the battery: étape 0, image 1 de 3 Sony WH-1000XM4 Battery Replacement, Remove the battery: étape 0, image 2 de 3 Sony WH-1000XM4 Battery Replacement, Remove the battery: étape 0, image 3 de 3
Remove the battery
  • Remove the battery.

  • Don't reuse the battery after it has been removed, as doing so is a potential safety hazard. Replace it with a new battery.

  • To install a new battery:

  • Remove any remaining adhesive from the battery well.

  • If your replacement battery does not come with replacement adhesive, lay some double-sided tape or pre-cut adhesive strips in the headphone's battery well.

  • Peel away any tape liners to expose the adhesive.

  • Lay the battery on the adhesive and press firmly.

バッテリーを外します

一度取り外したバッテリーの再利用はしないでください。潜在的な危険性が潜んでいます。新しいものに交換してください。

新しいバッテリーのインストール方法:

バッテリーが取り付けられていたエリアに残っている接着剤を全て除去します、

バッテリーに交換用の接着剤が付いていない場合は、両面テープもしくはプレカットされた接着ストリップをヘッドホンのバッテリー用スペースに装着します。

テープの裏面を剥がして、接着剤を露出します。

バッテリーを接着剤の上に載せて、しっかりと押し込みます。

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.