Battery Disconnect

Info : Vous modifiez un tutoriel prérequis. Toutes les modifications apportées affecteront les 10 tutoriels qui comprennent cette étape.

Anglais

Coréen

Traduction de l’étape 3

Étape 3

Insert the flat end of a spudger under the right edge of the battery press connector and pry straight up to disconnect it.
To reconnect a press connector, align it over the socket and gently press down on one side until it clicks into place, then press down on the other side. It might take a few tries to align the connector.
To prevent damaging the surface mounted components around the battery and 5G mmWave connectors, only pry where instructed.

Vos contributions sont faites dans le cadre de la licence open source Creative Commons.