Joe

14 150	Réputation
14	Solutions
0	Tutoriels

Current parts compatibility tester and former iFixit Professional Boxer. Somebody's got to get your parts stocked and packed.

Votes

Les vues éclatées auxquelles j'ai participé

Parrot AR.Drone Teardown

Les tutoriels auxquels j'ai contribué

iPhone 1st Generation Headphone Jack Replacement

iPhone 1st Generation Rear Panel Replacement

iPhone 1st Generation Camera Replacement

iPhone 1st Generation Front Bezel Replacement

iPhone 1st Generation Communications Board Replacement

iPhone 1st Generation Logic Board Replacement

iPhone 1st Generation Battery Replacement

iPhone 1st Generation Display Assembly Replacement

iPhone 1st Generation Case Replacement

MacBook Unibody Model A1278 Upper Case Replacement

Page 1 de 9

Continuer

Tutoriels terminés

Remplacement de la RAM du MacBook Pro 13" Unibody mi-2009

Remplacement de la nappe du disque dur du MacBook Pro 13" Unibody mi-2009

Remplacement de la batterie de l'iPod 5ème Génération (video)

iBook G4 12" 1.33 GHz DC-In Board Replacement

MacBook Core 2 Duo Logic Board Replacement

iPod 3rd Generation Battery Replacement

Réponses

Réponse à : « What the pads that the laptop rest on called? - four corners of bottom » 2 juil. 2012
We have always called them the feet of the computer. I know Radtech has some generic replacement feet that will work on any computer. Other companies probably sell them as well.
Réponse à : « Mac with most repairability (10 out of 10)? » 5 mai 2011
As far as accessibility to the most internals with the least steps I feel it is the Unibody line. Of course this is with access to all necessary screw bits.
Réponse à : « My iPod will not turn on its screen is black? » 22 avr. 2010
Well, if it's an old iPod that hasn't been used for a while it might just have a dead battery. If that's the case you can just install a new battery. This happened with my iPod 3rd Gen when I left it in the garage for awhile. Just installed a new battery and it works fine. Otherwise, we probably need more information to try and diagnose the problem you are having.
Réponse à : « Mousepad-problem - clicks are not registered » 5 avr. 2010
I know there is a screw on the opposite side of the track pad that when tightened prevents clicking. If you open up the bottom case and remove the battery it should be accessible. You'll need to use a T6 driver and all that needs to be done is to loosen it.
Réponse à : « Why is the sound not working? » 5 mars 2010
I would guess it's one of three things: 1. Double check that the sound isn't muted (unlikely but I had to mention it). 2. A cable has come unplugged in the computer that is preventing audio to get to the speakers. 3. Some component of the sound system needs to be replaced. Whether that be the speakers, sound card, or sound cable would have to be determined by testing.
Réponse à : « My front bezel won't snap back on? » 4 mars 2010
I believe you are talking about the small plastic pieces that sometimes stay attached to the front bezel itself. We've found the best way to reattach the front bezel is to pop these pieces off of the front bezel and put them back into the mounts lining the outside of the LCD. Then you just need snap the front bezel to these and it should stay attached.
Réponse à : « One part left over » 2 mars 2010
That would be one of the rubber bumpers that go on the hard drive. You don't need it on to have the iPod working, but it's probably good to have it in so that the hard drive is nice and secure.
Réponse à : « Why is my iPod cant keep a charge » 2 mars 2010
If you have the original battery in there it probably has just worn out. Replacing it with a new one is what I would recommend. Just make sure to buy the right one as there is a thin and thick version of this iPod.
Réponse à : « Replaced screen, no display, but backlight works, » 2 mars 2010
When I have encountered this problem usually a restore of the iPod will fix it, assuming the new screens work. So try connecting it to your computer and selecting Restore in iTunes.
Réponse à : « constant restore loop after logic board replace » 4 févr. 2010
Try unplugging all USB devices other than the iPod cable, keyboard and mouse. Sometimes when trying to do a restore other USB devices can interfere in the process. I that doesn't work then you should try to take it apart and replug all of the cables to make sure they all have a good connection. If that still doesn't work then it probably has a hardware problem. That would mean either the logic board, hard drive or possibly even the hard drive cable.

Page 1 de 2

Continuer

Commentaires de tutoriel

iMac Intel 27" EMC 2309 and 2374 Teardown 22 oct. 2009

Citation de cocoJim :

If i install a SSD instead of the optical drive, could i boot up OSX from the SSD and use the internal 3,5 HDD for media Stuff?

That should work just fine. You would just select the SSD in Startup Disk as soon as you get the drive in there with OS X installed.

Réputation au fil du temps

Répartition de la réputation

Évènement	Compte	Delta
Quelqu'un a utilisé votre tutoriel	4931	13037
Quelqu'un a apprécié votre tutoriel	501	586
La contribution a reçu un vote positif	20	240
Réponse acceptée	7	210
Message promu contenant un lien vers votre tutoriel	63	76