Aide
The Stem
@thestemgroup
The Stem
| 35 | Réputation |
| 0 | Solutions |
| 0 | Tutoriels |
| Membre depuis 12/03/2015 | |
The Stem is an Apple repair facility located in Calgary Alberta.
| 35 | Réputation |
| 0 | Solutions |
| 0 | Tutoriels |
| Membre depuis 12/03/2015 | |
The Stem is an Apple repair facility located in Calgary Alberta.
| Évènement | Compte | Delta |
|---|---|---|
| La contribution a reçu un vote positif | 2 | 24 |
| Réponse acceptée | 1 | 10 |
Can you verify if those tabs that slot into the display bear any weight of the display? One of the issues repairing 2012+ iMacs is the possibility of the display falling away if the adhesive fails. Does it look like those tabs hold the display in anyway?
When will we see a component swap test? So far it looks like we cant even swap the camera module without it going wonky, can you test if the displays can be swapped and other components?
Sorry, that was a typo! I meant 5s... so this confirms we should be able to use existing stock of iPhone 5s in the iPhone SE without issue?
Can you confirm that the display assemblies are exactly the same? Including the mid frame latches/clips? Would the display right out of an iPhone 5 not only function, but fit perfectly as well?