lukerockhill

trying to get data from this phone, like title says its loops 5-10 times then shows no image but backlight stays lit. with...

i have a nintendo switch at my store that isnt charging. i think its a bad resistor because im reading OL and no power is...

so to start out i dont specialize in mac repair, i mostly work on phones. but a friend of mine had an issue with their...

so i just recently got donor boards for testing lcds on the iphone 8/8+. and im using the qianli power pro to turn them on...

a customer brought in a 6s plus that was ran over by a car. they want to get it fixed to retrieve the data thats in the...

im working on a phone that gets error 9 after a hard drop. the phone is just stuck on apple logo. it only pulls .5 amp...

i have an ipad air that came in not charging. it pulls .09a when powered off and when its booted pulls 0… charge port...

hi, I am mainly a phone repair store but usually will take a look at any electronics people bring in. today i was brought...

to start, I am a phone repair store, and a customer brought mt a 5se stuck on itunes logo. its never been opened and shows...

a customer came in with iphone 7 that wasnt charging. tried new battery and charge port, wasnt charging. so with the...

can someone tell me the value of the resistor right by number 6. nintendo switch wont charge and the resistor is reading ol for me http://puu.sh/D2OMV/1562e70915.jpg

never buy a used phone that dosent turn on. especially iphones, because most likely even if you get it to power on the old owners apple id (icloud account) will still be logged in. and if thats the case the phone is a paperweight to anyone but the original owner. i would just open an ebay return and be done with it.

sounds to me like the baseband cpu is shorted. if thats the case theres no way to fix it.

just leave them out if everything is working. putting the wrong screw in the wrong hole can permanently damage your phone

dont restore it you will get error -1

check for short on nand power rails

there are filters for touch right where people typically pry the fpc connector off. you may of accidentally knocked it off during disassembly, ive seen it before a couple times.

there are 3 different replacement screens qualities on the market. aftermarket lcd aftermarket oled and oem refurbished. in my opinion the am lcd is trash and dont waste your money. the am oled is the way to go for price vs quality. its hard to distinguish between am oled and oem oled. just do youself a favor and dont use the lcd.

if you replace the home button it wont work as a home button and touch id wont work. there is however a special charge port you can buy and install that will allow the home button function to work just not touch id. https://www.unionrepair.com/new-charging-dock-flex-cable-with-home-button-return-solution-for-iphone-7.html or you can bring it to apple for a screen repair and they will fix the home button in the process.

there are 2 cables coming from the screen that connect to the motherboard. one is for the screen one is for the home button. the smaller one is for the home button. look carefully and see if theres a small tear in the cable. if there is a new screen should solve your issue.