Aide
Jamba
@jamba77
Jamba
| 1 | Réputation |
| 5 | Solutions |
| 0 | Tutoriels |
| Membre depuis 11/05/2016 | |
Votes
1
0
| 1 | Réputation |
| 5 | Solutions |
| 0 | Tutoriels |
| Membre depuis 11/05/2016 | |
Lorsqu'il en aura reçu, il pourra afficher un graphique de sa réputation au fil du temps.
Voici un aperçu de ce à quoi ressemble ce graphique :
| Évènement | Compte | Delta |
|---|---|---|
| La contribution a reçu un vote positif | 1 | 12 |
| Votre contribution a été supprimée en raison de signalements | 1 | -100 |
Success! I ordered the whole kit and thought I would do all these steps below. But instead I just unplugged the battery and skipped all the steps up to step 36. For getting loose the old glued in battery I used waxed dental floss, it is strong and easily available. I strung it around two wood pieces and wired it around the underside of the batteries, then slowly pulled it downwards till the end. This worked quite well and after 10 minutes all the 6 batteries were free. Now the ‘fun’ part, cleaning up the old adhesive strips. I used the little bottle of alcohol from the kit but found this not the best cleaning solution. Be warned, dont forget that in this position, directly under your downpressing fingers there is the glass trackpad and the display!! I really was scared to break them during this cleaning process. Because of this I switched to LIGHTER FLUID , which is stronger and the process quickly proceeded. Thanks ifixit for your great support.
Where is the PRAM battery located on this model, on the logicboard?