Cet utilisateur n'a pas encore complété son profil.
Questions
earlier this year my mother's iphone 5s randomly shut down despite it not being on low battery and couldn't be turned back...
Plus d'informationRéponses
Did you by any chance try rooting the phone?
Plus d'informationCheck if ccleaner is mac os compatable and check if there’s a ssd defragging tool within mac os and try running those.
Plus d'informationI think It’s just a resistor like those cream colored ones although I’ve never seen one with a V although that could be left over from the board designers, it’s found everywhere in eletronics and is used for power management.
Plus d'informationCan you give any more details? check if there’s anything covering the top front grill or any gunk in it, check the microphone/call volume, try restarting the app using it via pressing the square next to the home botton and swiping it, maybe even searching the app in main settings and removing the cache (don’t worry it’s just tempory data), try restarting it device via the power button.
Plus d'informationCheck if that specific laptop (hopefully there’s a model number under it) has a port that outports a display and connect it to a tv or monitor to see if there’s any image, if so then it could be just the display needs replacing.
Plus d'informationIf any plastic adhesives aren’t working then sugru is definately worth a look, afterall the part that moves is the 2 points in either side of the side-circle from what I can see.
Plus d'informationThat is really odd, can you provide anymore info, otherwise I think you will need to either, use a different account, check the device is up to date, or go into the settings and factory reset it which if like other android versions will be around the bottom sections of the system settings. hopefully any of those will fix the issue.
Plus d'informationAs long as everything is properly connected, I don’t see any reason why adhesive would effect functionality.
Plus d'informationDo you know what could have caused it? Unfortinately like buttons the D-pad is just a plastic cap connected to rubber that touches the circuit board so unless you got a decent repair shop nearby you would probably have to open it up and hope anything looks out of the ordinary.
Plus d'informationAs glass is obviously present your best bet is to use one of the guides to remove and reinsert the screen, which I believe is the first part to remove. If you’re not concerned how it looks then just ignore it the 6 or even 6s doesn’t have any water resistance anyway. If I were to guess the cause then it’s likely due to the bendgate issue those particularly with the plus varient suffered from at launch.
Plus d'informationPage 1 de 5
adam stepek
@walker998
703
Réputation
50
Solutions
0
Tutoriels
Membre depuis 10/05/17
Votes
1
0