Albert

One of my friends purchased the phone back in 2014, he denied every update when he got the phone, now when he checked the...

I just noticed that there’s a notification said “Send: checking drive permission” when I send email via Google Gmail on my...

My hard drive has 32gb and I encountered the error while tried to restore the settings back to factory settings. Please...

The live tile does not display the products on the current version or release of the MS Store. Is there anything wrong?

Apple admitted that is was slowing down older iPhones in order to preserve battery life and avoid crashes. But this...

My iPhone 7 rang, and there's a loud hissing noise that really scared me. What's wrong with that? And how can I fix the...

I was getting this message too whenever my iPhone restarts. Even though iMessage on my iPhone was working as expected as I...

One of my friends recently updated his iPhone 7 to iOS 11, something strange has happened. He had lost the contacts. He...

Apple does really disturb me when my iPhone pops up notification to upgrade to the latest iOS. It said that iOS 11 is not...

If trying onboard display (connecting the monitor to the mobo back panel) still not having any display could be a serious problem. Try clearing CMOS and try onboard VGA again. If it's still not displaying, it could be that the motherboard or monitor died. Or check out these methods to see if they are helpful.

Actually that means that your computer cannot recognize/detect the disk. Boot into Setup (Bios) and make sure the HDD is listed there. If not, check your wiring again.

This happens when the power to the Blu Ray is suddenly interrupted. 1.) Turn on the Blu Ray, your TV and the cable box if you have one 2.) As it does it's on and off tricks, press the "load DVD" button (above the #2 button ) on the remote 3.) Put any DVD in and press close 4.) When the DVD begins playing, press the Function TV source button. (Top Right Button) 5.) Press source button to HDMI 1 or, whatever HDMI setting you're on. Hope this works in your case.

Hi Mary, Another way to access the Advanced Startup screen is by using a DVD or USB which contains your Windows installation media. Once you are in the Advanced Startup (Automatic Repair) menu, you can restore your system using restore points, which will bring your system back to the previous working state.

A short, might preventing the board from starting. Check the standoffs between case and board and make sure that the case fans are connected to the motherboard only, not to both motherboard and power supply. Tips: As long as the power supply did not damage the hard drive control board all the files should be fine. But do remember, back up you computer is a good way to prevent loss caused by any unexpected.

To fix this, use these methods to troubleshoot this Windows Start error. Method 1: Run Startup Repair from Windows Recovery Environment. Method 2: Rebuild the boot configuration data (BCD) from Windows Recovery Environment. Method 3: Run System Restore from Windows Recovery Environment. Method 4: Use Startup Repair on a computer that has a preinstalled recovery option on your computer If none of these help, you can also refer to another post to see if they work for you. Hope my answer comes in handy.

You could try starting the computer in "Safe Mode" and see if the problem persists. If it doesn't happen then, it may well be a software problem or some from something else that is on the system that shouldn't be. You can also try to change power settings from balanced to high performance and see if it fixes the keyboard issue.

Try reseating the ribbon cable that goes to the buttons. Most likely it's slightly out of position or something.

Adding an SSD will make your Mac boot faster, copy files in the blink of an eye, and make the system more responsive when multitasking. You may just select the SSD as the destination disk to reinstall Mac OS X. After the OS has installed, the utility will ask you if you'd like to restore files from another disk. Select the original hard drive. Depending on how many files you have, this process could take some time, too.

These aftermarket screens are made in a completely different way to the original Apple screens, and the quality varies depending on the factory making the screen and the factory assembling it. The aftermarket OLED screen has come out mostly by the Chinese factory drove the price to more than three or four times the regular selling price. Because some factories have the brand new aftermarket OLED technology in their hands, the difference isn’t as clear as it might be. You may check out the “Comprehensive iPhone XS China Aftermarket Screens Comparison Test” Note: If your screen breaks and you get a non OEM replacement, your warranty is void. The repair pricing to screen damage only costs you $29 if you have AppleCare+ coverage. You may also follow these methods to replace your iPhone XS screen: Remplacement de l'écran de l'iPhone XS https://blog.rewatechnology.com/iphone-xs-max-broken-screen-glass-repair/ Hope my answer comes in handy for you.