Disassembled

Did you connect the flex cable s

So the bracket holding the key board is broken and is contacting the mother board

Just to be safe get a new one

Here’s the lcd and touch screen https://www.ebay.com/itm/192534501105?mk... new link https://www.blisscomputers.net/13-3-hp-spectre-pro-x360-13-4003dx-13-4101dx-fhd-lcd-touch-assembly-frame-bezel-647377/

Well i think you will need to get new ones

back of your machine. Your diagram does not list the color code but shows that your lid lock connects to J6 on your control unit PCB. You will need apply the jumper to whatever colored wiring attaches to J6 contact 1 and 3 (most likely red and blue but I'd hate to guess and have you damage your machine) Here is a spare tech sheet for you just in case you lost your. Go to page 18 [document : W10240504]

Maybe a corrupt file

First up u need to replace the starter

Most of the time a short is permanent

You need new recharge able batteries