Aide
Yves
Yves
| 16 | Réputation |
| 0 | Solutions |
| 0 | Tutoriels |
| Membre depuis 09/08/2012 | |
| 16 | Réputation |
| 0 | Solutions |
| 0 | Tutoriels |
| Membre depuis 09/08/2012 | |
| Évènement | Compte | Delta |
|---|---|---|
| Vous avez traduit un tutoriel | 1 | 10 |
| Modification contrôlée d’une étape de tutoriel acceptée | 5 | 5 |
I wonder if the two screws shown on the picture are not inverted. It would seem logical to me that the longest (1.7mm) screw be placed on the upper hole, (where there is the yellow circle) ie on the hole where there is extra thickness (of the gold plated grounding contact sheet metal) in the sandwich. I have not checked, however, I just put the screws in the same location as found.