Foam mounting pads under speaker on logic board substituteWhile cleaning up my logic board after a spill I had to pull the one speaker that is stuck (mounted) to the board via 4...
GPU thermal pads replacement? What do I replace with? Anybody?So, I had a spill on my late 2011 macbook pro. I caught it quick and the first clean up got about 95% of the liquid off...
Réponse à : « Spilled coffe, stripped it down, now how can I clean it? »i just got done going through the same thing. i used the denatured alcohol. it worked, but this is what i noticed... some people on the internet say leave it for hours or like over night. i say from experience that 1 hour was good with a soft tooth brush and some general clean up afterwards. the solder points wanted to tarnish up like mad until i rised with deionized water. ever then, i had to really go over it with a magnifying glass, so my opinion is alcohol can be a bit much, be careful if you use it. i found my liquid in places i couldnt even believe... this site was invaluable.