Cet utilisateur n'a pas encore complété son profil.
Questions
I need to replace a damaged ZIF/FPC connector for a Steam Deck. I cannot seem to find these anywhere. Is this a connector...
Plus d'informationSystem had no image. Replaced HDMI port & IC Retimer ( 3 ) times. Not bad chips/ports. Still no image. No blue or white...
Plus d'informationTrying to install a HDD from one Macbook Air to another without losing and data. All steps online seem to just guide you...
Plus d'informationI have a Iphone 6s Plus with a broken digitizer with no touch. After installing a new digitizer the phone disables the...
Plus d'informationIpad Mini. Unit has NO damage to the charge port. Using original Apple cable & charging block. While unit is booting up,...
Plus d'informationIpad Air 2 with broken digitizer and no touch. LCD was working without issue. New digitizer installed and unit still does...
Plus d'informationUnit will not charge in stand or directly into system. Replaced Battery/Charge port and Charger. System shows it is...
Plus d'informationI have tried a new battery and a new charge port. Phone appears to be charging as my meter reads 1.01 ma. Hard reset has...
Plus d'informationReplacing the digitizer on an iPad Air. This is the 4th Air I have done and this one is giving me fits. After installing...
Plus d'informationRéponses
This could be just a bad digitizer. If you purchased this unit off ebay or amazon, it is most likely a cheap product. If you have followed all the steps on ifixit on how to replace your digitizer and you still have no touch, it is most likely a bad digitizer. Did you have touch capability with the original broken glass? Buying quality parts are worth the price.
Plus d'informationHave you replaced the power supply? This is the large gray box that plugs into the system. If you have had a power outage or a power surge, it can blow the power supply. That's a good place to start.
Plus d'informationYou can also have a cheap part that is incompatible. I have seen this with iPhones. You will need a second assembly unit to test this.
Plus d'informationUsed original home button and two new ones. Same problem.
Plus d'information