Justin Robison

You open the HTC One A9s from the front. The screen is glued down with adhesive. I recommend using an iOpener and a set of Opening Picks. Here is a YouTube video detailing the repair: https://www.youtube.com/watch?v=qSWMFBcW...

Although not a Wiko certified battery, a replacement battery can be found here: https://www.amazon.com/2000mAh-Replacement-Battery-WIKO-Rainbow/dp/B017RC8J1A

There is actually an easy workaround to that error! Just turn your phone off, connect the charger, and then power the phone on. It shouldn’t give you that error when you do that.

To identify the short, you need to test each component individually. Most motherboards have obvious traces that you can follow to each component. If you can get a part number off of a component, you may be able to look up it’s resistance and voltage requirements.

A new power jack can be found here: https://www.amazon.com/GinTai-Charging-X555YA-X555DA-X555LA/dp/B072JGQM2Y It will need to be soldered to the motherboard.

Is this what you are looking for? https://www.amazon.com/Sandisk-4GB-SDHC-Nintendo-DSi-DS/dp/B00266P5WO/ref=br_lf_m_fw3zb3dvrm7...

Hi Robert, When you replaced the screen, did you transfer the home button from the old screen? If not, that is why Touch ID is not working. You may need to reseat the home button connector, as it may not be making a good connection. To be honest, I’m not sure about the force touch. I’ve never had that issue. Maybe someone with more experience with that issue can help shed some light on it.

Hi Alyssa. Has your iPad been dropped recently? That sounds like a bad digitizer. Is the A1432 model number correct?

The best way I have found is an iOpener and opening picks, both of which can be found in the “Opening Tools” sections of the Tools Store.

Any time a device with adhesive is taken apart, the adhesive should be replaced if possible. However, in this case, it appears that iFixIt does not have the adhesive. Most of the time, the adhesive is just used as a water barrier and isn’t actually used for holding the front cover on. I would look and see if you can find the adhesive somewhere (possibly ebay), but if not, it shouldn’t be that big of a deal.