Outils recommandés dans ce démontage

Introduction

This teardown will show you how to get inside your Xbox 360 S to fix what you need to.

Cette vue éclatée n'est pas un tutoriel de réparation. Pour réparer votre Xbox 360 S, utilisez notre manuel de réparation.

  1. Slide latch back and pull up to take the part of the side cover off.
    • Slide latch back and pull up to take the part of the side cover off.

    Ajouter un commentaire

  2. Take a flat head screwdriver and pull up on the two ends of the side cover.
    • Take a flat head screwdriver and pull up on the two ends of the side cover.

    Ajouter un commentaire

    • It would be a good idea to take out your hard drive so gently pull it out and set it aside.

    Ajouter un commentaire

    • Take your flat head screwdriver and lift up on every hole like the ones circled in the picture until it comes off.

    Ajouter un commentaire

    • To take off the frame, take a flat head screwdriver and pull of the latches until it comes off.

    Ajouter un commentaire

  3. Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    Répandez la magie de Noël
    Obtenez 12 $ de réduction sur les commandes de 50 $ ou plus avec le code FIXMAS12
    • Take your flat head screwdriver and place in one of the cracks of the side cover on the other side and pull up to take it off.

    Ajouter un commentaire

    • Take your flat head screwdriver and place it in the holes like the ones in the picture until the piece comes off.

    Ajouter un commentaire

    • Take a T10 Torque's screwdriver and screw off your network chip so you don't ruin it.

    Ajouter un commentaire

    • Take your flat head screwdriver and unlatch the two latches and then place a different screwdriver through the latch so it doesn't latch.

    Ajouter un commentaire

    • On the other side, take your flat head screwdriver and unlatch the latch. There is a harder latch farther inside so you have to stick the screwdriver far down and try to find it by feeling around. It helps to push both sides of your Xbox security sticker.

    Ajouter un commentaire

    • Use your T10 Torque screwdriver and take out the five black screws that are shown in the picture.

    Ajouter un commentaire

    • Take your front cover with your home and eject button and lay it down in front of the console. The front cover is connected to a power source by the home button. Be very careful to pull it over and then out so you don't break it.

    Ajouter un commentaire

    • This is what you will see when you are done with all the previous steps. For other teardowns like the disc tray or power source, look at ifixit.com to get the best on how to teardown something.

    Ajouter un commentaire

Julian Gonzalez

Membre depuis le 19/04/2018

330 Réputation

1 tutoriel rédigé

Some of these photos are just zoomed in and I have no idea which side, or which way up they are in respect of the console. I recommend further photos for clarity.

I don’t have this console, but I just like going through the teardowns.

Keith Woolven - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 19

7 derniers jours : 111

30 derniers jours : 573

Total : 3,570