Motor Assembly
|
2 Réponses Indice de 2 |
Why is my grinder overheating? |
|
1 Réponse Indice de 0 |
Why wont my Porter-Cable PC60TAG angle grinder not turn off? |
|
1 Réponse Indice de 0 |
Why won't my angle grinder turn on when plugged in? |
|
Sans réponse Indice de 0 |
Why can I not lock wheel to take off wheel |
Outils
Voici quelques outils couramment utilisés pour travailler sur cet appareil. Vous ne devriez pas avoir besoin de tous les outils pour chaque procédure.
Troubleshooting
If you are having issues with the Porter-Cable PC60TAG, try referring to the troubleshooting page.
Background and Identification
The Porter Cable PC60TAG is Porter Cable’s small version angle grinder. The grinder may be properly identified by reading the nameplate located on the handle of the device, which includes the model number (PC60TAG), as well as other information about the device. The device uses 6.0 amps at 120V and 11,000 rpms which is significantly slower than Porter Cable’s high powered models. The ⅝” - 11 spindle thread is compatible with 4-½” x ¼” x ⅞” disks provided by Porter Cable. Other key features includes an adjustable two-position handle and an adjustable guard to ensure max safety. Both guard and handle are removable, however it is not recommended. The max volt output is 120 V AC. There are no manufacturer recalls, and the main issues with this device are debris build-up and damaged power cords.
