Batterie
|
5 Réponses Indice de 2 |
release the chuck with stuck drill bit |
|
2 Réponses Indice de 0 |
Drill just stopped working |
|
2 Réponses Indice de 2 |
Why does the drill no longer work, but the led blinks 5 times? |
|
2 Réponses Indice de 2 |
Why is the drill making strange clicking sounds when in use? |
Outils
Voici quelques outils couramment utilisés pour travailler sur cet appareil. Vous ne devriez pas avoir besoin de tous les outils pour chaque procédure.
Background
The Ryobi P202 is part of the Ryobi One+ 18 volt cordless tool system. It is sold in the Ryobi P817 kit with a charger, battery, and carrying case. It is compatible with both the original NiCad and newer Lithium Ion battery packs.
This model has neon green plastic with grey rubber coverings. It has a built in level gauge and a two speed switch on the top of the drill. A magnetic tray, and drill bit clip are found on the base of the drill. The drill has a pressure sensitive trigger and has a maximum RPM of 1600 as seen on the warning label.
Identification
With the trigger pointing right, the label on the side of the drill shows a warning label as well as the identification name of P202.
Technical Specifications
- 18-Volt
- Holds up to 1/2 inch drill bits
- Spins up to 1600 RPM
- 24 torque settings
- Level gauge
- Magnetic tray
- Drill bit clip holder
Additional Information
Équipe
Cal Poly, Team 17-6, Forte Spring 2015 Membre de l'équipe Cal Poly, Team 17-6, Forte Spring 2015
CPSU-FORTE-S15S17G6
4 membres
10 tutoriels rédigés
