Beats Studio 2 Wireless Battery Replacement

Introduction

If your Beats Studio 2 Wireless headphones will not turn on or charge, it's possible the battery needs to be replaced. Use this guide to remove and replace the battery of your headphones.

For additional information on troubleshooting this issue, refer to the Beats Studio 2 Wireless troubleshooting page.

Ce dont vous avez besoin

Étape 1 Battery

Beats Studio 2 Wireless Battery Replacement, Battery: étape 1, image 1 de 2

Beats Studio 2 Wireless Battery Replacement, Battery: étape 1, image 2 de 2

Using a spudger, remove the panel circling the ‘b’ Beats logo on the right earphone by applying pressure upwards under the panel until it is removed.

Traduire

Étape 2

Remove the four screws securing the housing with a Phillips #00 screwdriver.

Traduire

Étape 3

Use a spudger to release the clip in the seam under the silver “studio” label.
Remove the right side of the headband.

Traduire

Étape 4

Gently remove the right earphone speaker from the headband by sliding the speaker downwards.

Traduire

Étape 5

Beats Studio 2 Wireless Battery Replacement: étape 5, image 3 de 3

Use the pointed tip of a spudger to carefully push on each side of the connector to release it from the socket on the motherboard.
Be gentle with the connectors as they can break easily.
Don't use a metal spudger to remove a battery or any internal component. This is potentially dangerous as it could puncture the battery and cause a fire or worse.
Use a nylon spudger to remove the battery from the headphones.