Problem

Rep: 1

3

Options

Problem

Hi my name is leandro i have a Ibook G3 14 and i was having a issue with the display so i tried to fix it puting a shim in the diplay chip but now after all my computer doesnt turn on after I finish and i dont no why. it was all ok before that i had problem with a blue and white cable near the Modem that was conecte to the keyboard palm rest or the turning on button the socket was out and i put it again i dont no why it does not turn on you think i forgot something else? thank you!!

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non

Indice 0

6 Réponses

Solution retenue

rdklinc @rdklinc

Rep: 32,4k

RDKL, Inc.

207

156

62

Options

I'm not sure I understand the description of the problem, but one thing I would recommend is keeping the computer open, i.e. just let the topcase/rest on top the board while it is plugged in. That way, you can verify your connections, try powering it on, unplug/plug in another connection, try powering it on, etc. Nothing is more frustrating that putting an iBook all the way back together only to realize something else is wrong and you have to go back in again.

Cette réponse est-elle utile ?

Oui Non

Indice 1

QEII Student IT @qeiistudentit

QEII Student IT @qeiistudentit Rep: 4,8k 28 30 5 · Answer 1 · 2009-12-13T10:12:01-07:00

Réponse la plus utile

Rep: 4,8k

28

30

5

Options

I would try soldering two wires to the contacts on the board and soldering the power button port to the end of the two wires.

Cette réponse est-elle utile ?

Oui Non

Indice 1

2 commentaires:

You think this is the problem?

13 déc. 2009 par superbat

I'm not sure I fully understand but if your power button connector socket has come off the logic board you could definitely try my suggestion.

13 déc. 2009 par QEII Student IT

superbat @superbat Rep: 1 3 · Answer 2 · 2009-12-13T09:54:12-07:00

Rep: 1

3

Options

Well i am just making like contact with the base with something to see if its turning on is not solded.

Cette réponse est-elle utile ?

Oui Non

Indice 0

1 commentaire:

You mean the port isn't soldered onto the board?

13 déc. 2009 par QEII Student IT

superbat @superbat Rep: 1 3 · Answer 3 · 2009-12-13T09:58:24-07:00

Rep: 1

3

Options

yes i mean that but i think that it should turn on making contact with the board with something.

Cette réponse est-elle utile ?

Oui Non

Indice 0

superbat @superbat Rep: 1 3 · Answer 4 · 2009-12-13T11:46:45-07:00

Rep: 1

3

Options

There is no way to turn on teh computer like in other way or with a trick?

Cette réponse est-elle utile ?

Oui Non

Indice 0

Ashok Singh @ashoksingh25127

Ashok Singh @ashoksingh25127 Rep: 1 · Answer 5 · 2021-04-02T20:56:12-07:00

Rep: 1

Publié: 2 avr. 2021

Options

I don't know I comprehend the depiction of the issue, however one thing I would suggest is keeping the PC open, for example just let the topcase/lay on top the board while it is connected. That way, you can confirm your associations, take a stab at controlling it on, unplug/plug in another association, have a go at driving it on, and so forth Nothing is seriously baffling that putting an iBook right back together just to acknowledge something different isn't right and you need to return in once more. Source

Cette réponse est-elle utile ?

Oui Non

Indice 0