Réparez vos affaires Communauté Boutique

645 questions Voir tout

Options

Black screen on MacBook 2010 A1342 after upgrades

I just finished installing a new trackpad, logic board and the display cable. When I turned it on I got the chime but the screen is black.

I'm pretty sure that all of my installations and connections are correct.

If anyone has any idea how to fix this it will be greatly appreciated!

Thanks

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Réponse la plus utile

Options

You changed too much at the same time so its hard to identify whats bad here.

Your problem could be a bad logic board, display cable or the display its self. The easiest way would be to use a second good system to swap out the display and the display cable to hopefully isolate whats bad. If you have an external display you could give that a try as well.

Cette réponse est-elle utile ?

Oui Non
Indice 1

6 commentaires:

I tried an external display and I can barely see what’s on the screen I can see where I log into the MacBook but it’s not taking my password to open the machine up.

Any more suggestions?

par

I would guess your replacement logic board is bad. Put back the old one if it works, if not get another one.

par

Thanks,

I can't put the old logic board in because I broke the display cable connection. That's why I put in a new logic board and display cable.

par

Then it's time to get another logic board.

par

I put in a new logic board and it works fine one day and another day all I get is a grey or totally black screen. Any idea what could be causing this? Thanks for your help.

par

Afficher 1 commentaire en plus

Ajouter un commentaire

Ajouter une réponse

Joe sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 67