Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Boutique

Sorti en juin 2012, modèle A1278. Processeur Intel avec Turbo Boost, jusqu'à 512 Mo de RAM vidéo DDR5

Questions au sujet de 1551 Voir tout

QWERTYUIO not working-I know there are some post re this BUT none work

I just switched out my dead logic board on my Macbook Pro 13” mid 2012.

Everything seems to be working but some keys in the keyboard are not. Specifically, QWERTYUIO [ ] = and the power button. Oddly enough P works fine.

I have tried everything I found here. I can’t reset PRAM or SMC because both require buttons on the keypad that aren’t working. Are there other solutions that aren’t already listed here on ifixit?

By the way, the keyboard was working fine before the logic board died. I don’t think it’s the logic board based on everything I’ve read here. I know there is a solution but, for the life of me, I can’t find one. Please help.

Thanks,

John

Two more photos:

Block Image

Block Image

Edited: Here is a photo of the ribbon. I’m pretty sure it’s connected correctly.

Block Image

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

Le kit d'outils Essentiel

Les outils les plus utiles dans notre kit le plus compact.

J'achète

Le kit d'outils Essentiel

Les outils les plus utiles dans notre kit le plus compact.

J'achète

1 solution

Réponse la plus utile

Is an external USB keyboard works ? Check if the keyboard ribbon cable is well inserted into the connector, also look carefully at the connector and the cable end. Also verify the keyboard connector area for missing or damaged capacitors or resistors or corrosion in the area. Good luck :-)

Cette réponse a-t-elle été utile ?

Indice 2

Commentaires:

I'm going to try an external keyboard. I did check the ribbon. I don't see any damage but it possibly could be damaged with all the attempts I made to plug it in correctly. I finally used the tape method to insert it properly. I don't see any corrosion or damage. I did clean the area with compressed air and also isopropyl. No dice on either one of those. This seems to be a common problem with MBPs and makes me wonder if I'm missing some easy fix or not doing it right.

par

@donjuanelguapo - The issue is getting the connection secured properly to the logic board. I've seen cables not inserted fully, damaged cables as well as damaged logic board connector. Yes, getting the cable in is a bit tricky!

Post some pics so we can see things: Ajout d'images à une question existante

par

@danj Photo added to original post.

par

@donjuanelguapo - Can you take a second one with the latch up so I can see the solder joints under it.

par

@danj Photos added to original post. Sorry by phone doesn't take clearer pics.

par

Afficher 1 commentaire en plus

Ajouter un commentaire

Ajouter une réponse

John sera éternellement reconnaissant.
Afficher les statistiques:

Dernières 24 heures : 1

7 derniers jours : 2

30 derniers jours : 4

Total : 57