Réparez vos affaires Communauté Boutique

iPhone 4 pouces commercialisé depuis mars 2016 avec une configuration de matériel similaire à l'iPhone 6s. Disponible en Argent, Gris sidéral, Or ou Or Rose, avec 16 ou 64 Gb de stockage. Modèles A1662 et A1723.

1049 questions Voir tout

Options

Problem with FL2400/C2400 in iPhone SE

Hi everybody,

This is my first question right here. I’ve been looking for an answer to my problem but couldn't find it.

I have two Iphone SE (one is mine and the other is my cousins). My phone didn’t turn on after a screen changing. My cousins phone worked but the battery didn’t charge at all.

I could open them and see them under the microscope. Both of them had the FL2400 removed. I tried to solder them back but didn’t succeed and lost them.

So i shortened the pads of the FL2400 with a wire. Doing so, in my cousins phone i lost the C2400 cap.

So the result is this:

  • My Phone: FL2400 pads shortened with a wire and C2400 soldered. My phone doesn’t turn on and Itunes doesn’t recognize it. But i measured the current and is around 100-200mA.
  • My cousins phone: FL2400 pads shortened with a wire and C2400 not soldered. That phone doesn’t turn the screen on, but it is alive because Itunes recognize it.

So the question is, do i need to solder FL2400 and C2400 and may be the phones will work? or the problem could be elsewhere.

Thanks!

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Fl2400 will need to be in place the cap doesn’t really matter, did both phones have the battery disconnected when you connected the lcds

Cette réponse est-elle utile ?

Oui Non
Indice 1

7 commentaires:

Yes both of them had the battery disconnected. I also checked the backlight filters of the display circuit and are OK.

So i should try replacing the filter then.

I have to see where to buy them because in my country (Argentina) i won’t find them.

Thanks a lot!

par

Is that possible that not having the FL2400 can impact on no display at all?

par

No it would usually only cause a battery percentage issue.

par

Do you think of any other test that i can do to troubleshoot this?

par

Can you buy zxw. It will give you diode readings for the lcd connector.

par

Voir 2 commentaires en plus

Ajouter un commentaire

Ajouter une réponse

Juan Pablo Iñigo sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 514