Aller au contenu principal

13" aluminum unibody, 2.0 or 2.4 GHz Core 2 Duo processor.

574 questions Voir tout

White screen but is working on external monitor

The display is working before but this morning as I was turning it on, for the first few seconds it is displaying the logo correctly but then some weird lines took over the screen then it turned white. I plugged it into an external monitor and it is working just fine (which means the GPU ain’t faulty) presumably that the LCD and its cable may have been damaged through wear and tear. So I replaced it with an LCD from a MacBook of the same model and the problem still persists. Is there a component on the motherboard responsible for this display failure?

The screen during boot (It also has a display after waking from sleep)

Block Image

The screen after a few minutes of warming up

Block Image

I was not able to take a picture of the lines appearing on the screen (my camera can’t pick it up)

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

If your external is working then you’ve nailed the issue down to the internal display. Likely the T-CON board which drives the display failed its located at the bottom of the LCD panel. Here’s the needed part: Unibody MacBook Complete Display and here’s the guide Remplacement de l'écran complet du MacBook Unibody modèle A1278

Cette réponse est-elle utile ?

Indice 0

2 commentaires:

Alrighty. But before I buy a replacement, could there be any components that likely cause this issue (aside from the T-CON?)?

par

@tinkerwarr10r - Did you damage the logic board connector for the display (and/or the LVDS cable)? Take some pics of the logic board connector and the cable end so we can see things.

par

Ajouter un commentaire

Ajouter une réponse

Francisco T. sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 1

30 derniers jours : 6

Total : 157