Réparez vos affaires Communauté Boutique

Tutoriels de réparation et informations de démontage pour le MacBook Pro 16" commercialisé en novembre 2019. Modèle A2141, EMC 3347.

211 questions Voir tout

Options

What other parts are required to replace the touchbar?

Hello , recently I'm having issue that my MacBook Pro 16" 2019 keeps shutting down or restarts by it's own. I have another problem too where the Touchbar keeps flickering and blank buy it's responding. I went to the apple store they said it's not the logic board problem. It's the touchbar , where the top case need to be replaced. Can I know what other parts are required to replace the Touchbar ? Thank you.

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s

Options

Well… Apple loves making things hard! Sadly, it’s not a simple. The TouchBar is glued down to the uppercase quite well. I’ve used solvents and heat taking a few hours to get it off in the older 2016/17 models when I was able to get my hands on the part.

Frankly, the 16” part is about $150 USD getting a uppercase I think is the better direction today. First your battery is getting close to four years, your keycaps are likely a bit worn as well. A used uppercase can be had for $300 USD a new one from Apple is about a hundred more with a fresh battery.

But, I’m not sure you need a new TouchBar. Often the driver logic which is located on the cable is the problem.

Cette réponse est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

Ajouter une réponse

Saabiresh Letchumanan sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 3

Total : 44