Aller au contenu principal

{A1989 / EMC3214} — Sorti en juillet 2018, le MacBook Pro 13" contient des processeurs quad-core i5 et i7 et une carte graphique intégrée Intel Iris Plus.

198 questions Voir tout

MacBook not starting after battery replacement

Replaced the battery on my 2018 Macbook Pro Touchbar, turned it on, and it started, Coconutbattery said it was at 100% battery health with 0 battery cycles. I took out the battery, used the adhesive strips to glue it in, and then put it back together. Now, when I try to start it, it shows no signs of life. I've tried reinstalling the battery several times, as well as starting the Macbook while plugged in. Is there anything else I could do? How else can I troubleshoot this issue? Thanks in advance :)

Répondre à cette question J'ai le même problème

Cette question est-elle utile ?

Indice 0
Ajouter un commentaire

1 Réponse

Did you forget to fully shut down the system the second time? Refer to Step 1 in this guide Remplacement de la batterie du MacBook Pro 13" Touch Bar 2018

At this point you need to connect a second Mac via USB-C using Configurator2 App to recover things.

Cette réponse est-elle utile ?

Indice 0

2 commentaires:

Thanks for the response! It looks like I did forget to disable auto boot before doing the repair. Will I be able to get the Macbook working again? If so, how do I go about doing that. Thanks again!

par

@maximm65709 - You need to leverage a second system to run Confurator2 apps

par

Ajouter un commentaire

Ajouter une réponse

Maxim M sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 2

30 derniers jours : 2

Total : 34