Réparez vos affaires Communauté Boutique

Commercialisé en mai 2020, ce MacBook Pro 13" comprend des processeurs quad-core 8e génération Intel Core i5 et i7 ainsi qu'une carte graphique Intel Iris Plus 645 intégrée. Modèle A2289/EMC3456 avec deux ports Thunderbolt 3.

80 questions Voir tout

Options

Battery not recognised but works unplugged.

Model: A2289 - MacBook Pro 13" Two Thunderbolt Ports 2020

Cycles: 5

Recently replaced battery with an iFixit one.

The system no longer recognises the battery (and coconutBattery shows NaN SoC), and sleeps when unplugged.

Tried SMC reset, PRAM/NVRAM reset, nothing. Assumed another battery failure.

Then tried disabling sleep entirely with the command

sudo pmset disablesleep 1

and now the MacBook runs perfectly fine on battery power, but the system still doesn't recognise the battery.

Has anyone encountered this issue before, or does anyone have suggestions on what else I can try?

Répondu ! Afficher la réponse J'ai le même problème

Cette question est-elle utile ?

Oui Non
Indice 0
Ajouter un commentaire

1 Réponse

Filtrer par :
Les plus utiles Les plus récentes Les plus ancien(ne)s
Solution retenue

Options

Beginning at Step 9 of this guide you can see the battery data cable. Make sure that this was transferred over from the original battery to the replacement battery correctly. If this cable isn't properly installed the system will not recognize the battery properly. If you're certain that the battery data cable and the rest of the battery is installed correctly, then I would operate under the assumption that the battery you installed is faulty. Good luck!

Cette réponse est-elle utile ?

Oui Non
Indice 2

2 commentaires:

Or the cable is damaged and needs to be replaced MacBook Pro 13" BMU Flex Cable

par

I just finished a battery replacement on an A1466 MacBook Air and ran into the same problem. Turned out the fix was as easy as opening it back up and reseating the battery connector; on the Air it's a single plug so it's not a one-to-one comparison, but essentially I just hadn't gotten it plugged in fully.

Once the plug was in all the way, everything started working like it should.

par

Ajouter un commentaire

Ajouter une réponse

dotxyz sera éternellement reconnaissant.
Nombre de vues :

Dernières 24 heures : 0

7 derniers jours : 0

30 derniers jours : 0

Total : 69