Aller au contenu principal

Réparez vos affaires

Droit à la réparation

Pièces & Outils

Pièces

Aucune pièce spécifiée.

  1. Turn the system badge flap over (1) and then remove the ten M2x3 screws that secure the base cover to the computer (2). Pry the edges of the base cover and lift it to remove it from the computer.
    • Turn the system badge flap over (1) and then remove the ten M2x3 screws that secure the base cover to the computer (2).

    • Pry the edges of the base cover and lift it to remove it from the computer.

    • NOTE: Use a Torx #5 screwdriver for the base screws and a Philips screwdriver for the two M2x8 screws inside the badge flap.

  2. Manta Precision Bit Set

    112 embouts pour toute réparation.

    Upgrade Your Toolbox

    Manta Precision Bit Set

    Upgrade Your Toolbox
  3. Disconnect the battery cable from the system board [1].
    • Disconnect the battery cable from the system board [1].

    • Remove the seven M2x4 screws that secure the battery to the computer [2].

    • Lift the battery off the computer [3].

    • Do not apply pressure to the surface of the battery

    • Do not bend

    • Do not use tools of any kind to pry on or against the battery

    • If a battery cannot be removed within the constraints above, please contact Dell technical support

Conclusion

To reassemble your device, follow these instructions in reverse order.

Une autre personne a terminé cette réparation.

Johnathan Hammond

Membre depuis le 28/02/2018

36 836 Réputation

408 tutoriels rédigés

Équipe

Informative Technologies Inc. Membre de l'équipe Informative Technologies Inc.

Community

21 membres

1 816 tutoriels rédigés

Ajouter un commentaire

Afficher les statistiques:

Dernières 24 heures : 5

7 derniers jours : 41

30 derniers jours : 185

Total : 3,798