Cette version peut contenir des modifications incorrectes. Passez au dernier aperçu vérifié.
Introduction
Ceci est un guide de remplacement du haut parleur situé sur la facade avant.
Ce dont vous avez besoin
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Lift the battery out of its recess and remove it.
-
-
-
Enlevez les 13 vis au dos du téléphone.
Only the bottom 6 screws (below the battery contacts)need to be removed since your only removing the bottom panel.
-
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Remove the eight Phillips #00 screws (4 mm length).
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Insert an opening pick between the bottom right corner of the motherboard cover and the motherboard.
-
Pry up the motherboard cover to open the plastic clips which hold the cover in its place.
-
Work your way along the right edge.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Carefully lift the right edge of the motherboard cover.
-
Remove the motherboard assembly.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a spudger to pry up and disconnect the display flex cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a spudger to pry up and disconnect the digitizer flex cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a spudger to pry up and disconnect the rear camera flex cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Use a spudger to pry up and disconnect the front camera flex cable.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Slide an opening pick under the bottom right corner of the motherboard and slowly pry it out of its recess by rotating the opening pick sideways.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Slide the opening pick under the right edge of the motherboard where the SIM card slot is located and pry it up by rotating the opening pick sideways.
-
-
Cette étape n’est pas traduite. Aidez à la traduire
-
Grab the top section of the motherboard and carefully lift it out of the phone.
-
-
-
Prenez l'outil d'ouverture en plastique et retirez le haut parleur en l'insérant dans les côtés et en soulevant.
-
Pour réassembler votre appareil, suivez ces instructions dans l'ordre inverse.
Pour réassembler votre appareil, suivez ces instructions dans l'ordre inverse.
Annulation : je n'ai pas terminé ce tutoriel.
8 autres ont terminé cette réparation.
Merci à ces traducteurs :
0%
Ces traducteurs nous aident réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›
3 commentaires
unless you broke the phone, NO