Introduction

Si vous venez de remplacer le disque dur de votre Mac, vous aurez besoin de réinstaller macOS sur votre système. Ce tutoriel va vous montrer comment installer macOS High Sierra sur un disque dur vierge.

Avant de commencer, vous devrez créer une clé USB bootable. Pour créer cette clé, vous devrez pouvoir accéder à un Mac actuellement sous High Sierra afin de télécharger le fichier d'installation de 7,7 GB présent sur l'App Store.

Suivez ce tutoriel pour créer une clé USB bootable avant de continuer avec ce tutoriel.

Outils

Pièces

Aucune pièce nécessaire.

Éteignez l'ordinateur et déconnectez tous les disques durs externes et clés USB  de votre Mac.
  • Éteignez l'ordinateur et déconnectez tous les disques durs externes et clés USB de votre Mac.

  • Connectez votre clé USB bootable contenant macOS High Sierra.

  • Appuyez sur [option] ou [alt] (⌥) et allumez votre appareil.

  • Une fois qu'apparaît l'écran de sélection du système comme montré sur la photo, relâchez la touche [option].

  • Servez-vous des flèches du clavier ou de la souris pour sélectionner "Installer MacOS High Sierra." Appuyez sur [entrée] ou cliquez avec la souris.

Ajouter un commentaire

Votre Mac commencera à copier les fichiers d'installation depuis la clé USB vers votre disque dur. Cette procédure peut prendre jusqu'à 30 minutes.
  • Votre Mac commencera à copier les fichiers d'installation depuis la clé USB vers votre disque dur. Cette procédure peut prendre jusqu'à 30 minutes.

    • Selon la vitesse de votre mémoire flash, il se peut que vous ayez l'impression que l'installation soit bloquée, mais cela signifie juste que vous devez continuer à attendre.

  • Lorsque vous y êtes invité, sélectionnez votre langue et appuyez sur [entrée] ou servez-vous de la touche flèche.

Ajouter un commentaire

  • Si vous n'avez pas besoin de pré-configurer votre disque dur, passez directement à l'étape 5. Si vous n'êtes pas sûr ou si le disque dur n'est pas neuf, alors vous pouvez pré-configurer votre disque dur.

  • Sélectionnez "Utilitaire de Disque" et appuyez sur [entrée] ou cliquez sur la touche continuer.

Ajouter un commentaire

  • Sélectionnez votre disque dur parmi la liste de la colonne de gauche de l'Utilitaire de disque.

    • Il s'agit le plus souvent du disque non initialisé.

    • Si vous avez plusieurs disques durs, veillez à sélectionner le bon disque car à l'étape suivante, celui-ci sera complètement effacé.

    • Cliquez sur le bouton "Effacer" en haut de la fenêtre.

    • Choisissez un nom pour votre disque (vous pourrez le renommer plus tard). Laissez le format "Mac OS étendu (journalisé)" et le schéma "carte de partition GUID".

    • Cliquez sur "Effacer".

    • Une fois le processus terminé, cliquez sur "Terminé".

    • Quitter l'Utilitaire de disque en cliquant sur le bouton rouge en forme de X dans le coin supérieur gauche de la fenêtre.

Ajouter un commentaire

  • Sélectionnez "Réinstaller macOS" dans le menu et appuyez sur [entrée] ou cliquez sur la touche "Continuer".

Ajouter un commentaire

  • Lisez le contrat de license.

  • Cliquez sur "Accepter" pour accepter ce contrat de license.

  • Votre Mac va maintenant installer macOS High Sierra. Soyez patient et attendez bien jusqu'à la fin que cela se termine.

  • Une fois l'installation terminée, l'ordinateur redémarrera automatiquement.

Ajouter un commentaire

Conclusion

High Sierra devrait maintenant être fraîchement installé. Profitez-en !

453 autre(s) ont terminé cette réparation.

Merci à ces traducteurs :

100%

Ces traducteurs nous aident réparer le monde ! Vous voulez contribuer ?
Commencez à traduire ›

Arthur Shi

Membre depuis le 03/01/2018

21 645 Réputation

82 tutoriels rédigés

Équipe

iFixit Membre de l'équipe iFixit

Community

107 membres

6 499 tutoriels rédigés

40 commentaires

I replace Toshiba MK1231Gal dard disk based on instruction on yutube http://www.youtube.com/watch?feature=pla...!

the problem is that when I try to install osx, I cant format the disk

I got notice input, output error, when try to make a partition or try anything with disk utility

I own MacBook air 1237

Iztok - Réponse

I replace Toshiba MK1231Gal dard disk based on instruction on yutube http://www.youtube.com/watch?feature=pla...!

the problem is that when I try to install osx, I cant format the disk

I got notice input, output error, when try to make a partition or try anything with disk utility

I own MacBook air 1237

Iztok - Réponse

yes, me too...did you get it fix? please share how.

jay zee -

A small pointer for any who have the same issue. I put in an entirely new 2TB WD sata drive and then preformed a fresh install of snow leopard onto it. When I got to the section to choose which drive to install to there was no drive image.

I clicked at the top on disk utility, then picked the drive, clicked erase and erased the drive. THis actually formats it into a mac format. after this I closed disk utility and voila the drive was now visible and installation could commence.

Good luck

Sam - Réponse

This guide was awesome!

Thank you!

staplesjoel - Réponse

This Mac OS X Install Guide is really outdated. When using a Recovery disk to install Mavericks, OS X just told me it couldn't install Mavericks. Didn't tell me why, it just told me it couldn't do it. I did something like this:

1. Get a USB or Firewire HD enclosure. Use the iFixit HD Replacement Guide to put your new HD into your iMac and put your old HD into the enclosure.

2. Plug in the enclosure and its USB or firewire cable to your iMac.

3. Hold down the option key on your keyboard and turn on your iMac. When it boots, it should recognize your old HD in the enclosure and give you the option to boot from that drive. Select that drive. It's just like booting when the drive was still in the iMac but maybe a little slower.

4. Now go to the App Store and Download and install Mavericks. You'll need to select "Show all Disks". You may need to use Disk Utility to format or erase your new HD if it doesn't show up. Use Migration Assistant to transfer apps and data from your old HD to your new HD in the iMAC.

Wade Bick - Réponse

Thanks for helping others! This install guide is specifically for Mac OS X 10.5 Leopard. We are working to make guides for installation of the more current OS's, but they haven't been completed at the current time.

Mike -

Hi, my questipn is: i have to insert the os cd before installing the new hard drive?

Miguel Yanez - Réponse

You do not need to install the disk prior to installing the Hard Drive.

Mike -

I need help. I have 10.5.8 on my macbook. My hard drive is messed up so I cant erase the hard drive as the erase button is greyed out. So I am trying to format everything in my macbook and reinstall osx. But I got 10.6 only. Please advise how to erase everything on hard disk and installing clean osx on macbook? Is anything I should know?

Ahmd Faruq - Réponse

Depending on your MacBook, you may be able to install Mac OS X 10.6 onto that machine. You will need to boot up from that disk prior to doing the erase of the hard drive as well.

Mike -

After installing new HDD in IMAC...power on gives a yellow screen. Is it possible to get to formatting utility from this point? I tried a command R no luck.

2nd attempt I tried inserting Snow Leopard disk, tried 'option' key at power on, tried Cmd-R, tried no key; disk goes into a cycling routine but nothing appears on screen.

Rich - Réponse

I think what's Happening Here is a lot of people aren't formatting drive before hand. Old drive dies new one pop in and your good. This is not the case Mac, Kaspersky uses a tool to allow you to make a bootable disk from your usb for your Mac or your PC. Use the tool that used because there are a lot of viruses out there. That what you want to do since you don't want to rip your Mac apart is download Ubuntu ISO file learning is a bootable ISO you can use FAT32. Once you do that put it in the USB drive boot from the USB. Sorry forgot to stop you need to get rid of your vram clear option RVP or something. Next is booted off the USB having its command option r. Now you want to format Drive using Ubuntu. Yes Ubuntu free where is more powerful that are Mac OS X and it's free. Now you have to remember using a Mac which is a Linux machine and it's grub so the file extension is htls. Grub you do not format NTFS…

Kapsol -

Once you've done that you need to os. So you can pay the $20 for it which is a joke you could download it from a torrent I'd be very careful doing that or if you have a 2011 that came with it manhole command-r now the problem here is it will not allow you to connect. Therefore you need to open your router settings if you have an old router that would be best.

Kapsol -

Set that router up to connect to an open DNS so where it says DNS connection you want to use Google DNS OpenDNS Mike's DNS ect Google DNS in OpenDNS are the best. And then you have to hold command-r and it now will allow you to connect to get the file. Once that gets the file it'll start the installation process your screen will turn white let it turn white holdzkom and wipe out the vram again reboot redo it and your set. And now if you're still having problems do a hardware check I think that's holding the just hold D at start up. Keep hope alive. You guys can donate for all my time put into this BS very awesome even $0.10 a penny anything be better than nothing kapsol101@yahoo is my email and PayPal if you have problems just email me now I'm always here to help. Unless I die like Steve Jobs did cuz karma's a bch.

Kapsol -

I have a MacBook Early 2009 A1181 Model. Just ordered a SSD from Amazon, and have all of my stuff backed up on the external hard drive I use for backing up. I still have all of my installation CDs, but want to make sure of the tools I need for this. I know I take the battery out, and that metal cover in that area, but for my Mac I'm not sure if it would be the same tools since it is older than what you guys have.

Also, one quick question, can I change the processor in this? I will be switching out the ram soon, likely after tax season, but I want to get a faster processor if possible.

rtaillon1 - Réponse

I replaced the original 320 GB OEM Apple/Hitachi drive in my 2007 iMac with a 3 TB Hitachi/HGST drive today using the iFixit guide. To reinstall OS X, I used an Apple USB thumb drive, which after reformatting with Disk Utility, is currently downloading Lion from Apple. I also decided to run the formatting/reinstallation before reassembling the front bezel and glass, in case my son and I did something wrong in the drive replacement. Fortunately it looks like we did everything right.

recmsoj - Réponse

Thought that I would add this comment in case someone has similar situation. MBP late 2011 replaced HD with SSD (Samsung 850 EVO). The angle on the install was that my Time Machine and Old HD were encrypted. When encrypted (Time Machine and CCC clone of drive), the Recovery HD is not setup (not sure details, perhaps this is how encryption works). Either way, setting up a bootable Install USB drive (8 gig minimum for Yosemite) was necessary. Sequence was full backup (I did both Time Machine and CCC to be sure)., create bootable USB installer drive (Google it, I used the Disk Utility method). Shut Down, Reboot with Command-R, plug in USB drive, format new disk, load Yosemite from USB to new disk, then shut down, Restart with Command-R, then load Time Machine backup. The clean Yosemite install setup the Recover Partition on new drive and the files copied from Time Machine restored system to original state without messing with newly created Recovery partition. Then encrypt new drive and you are done.

Brian - Réponse

Hi,I am getting ready to replace the drive in my early 2008 20" iMac. I have a Time Machine backup but do not have the OS installation disks. How can I get replicate my current drive contents to the new disk?

Jenerationnyc - Réponse

Thank U, Clear I would like to test and check. :)

Sasteam Vander - Réponse

please mention Customize ,that can save many GB of disk space with unwanted junk.

Andrew Waddington - Réponse

How do you install 10.5 over 10.7) (which is on a 2nd partition) to downgrade to 10.5 due to having to use some software limited to 10.5?

Greg Brooker - Réponse

How do you install 10.5 over 10.7 (10.7 is on a 2nd partition) to downgrade to 10.5 due to having to use some software limited to 10.5.

Greg Brooker - Réponse

I don't have a Snow Leopard disc. I downloaded Snow Leopard to an external hard drive, and connected it to the mac before starting up and pressing the Option Key. All I get is a grey screen and a cursor. Is there a way to format my new 1TB hard drive using software loaded onto an external drive?

arleyrose - Réponse

I don't have a Snow Leopard disc.

I downloaded it from the apple website and loaded the MacOSXUPD10.6.8.pkg onto an external hard drive and connected it to the iMac. I started it up, pressing the option key down, and all I get is a grey screen and a cursor. Is there a way to format my new 1TB internal hard drive using the software loaded onto an external drive? Kinda new to this :(

arleyrose - Réponse

I just brought a PowerBook G4 it currently runs os x 10.4.11 how do I update it to 10.5 without the disco considering I can't find one anywhere!

diggadog - Réponse

OK - I replaced my HD for my Mac Book Pro 15" #1211 and reloaded software and everything works... but the software upgraded to OSX Lion and again everything works... but it won't up grade to anything beyond Lion. What am I missing? Is it a hardware restriction or some other problem?

pmoretti - Réponse

I replace on 2009 Imac my old HHD with a new SSD 1TbThen the screen was blank. i had to insert the Snow Leopard CD hold on option button and open the Utilitys and chose the new ssd to install the Snow Leopard.Then i did ll the updates and downlead and install all Lion,Maverik,Yosemit ,.and it works

Daniel - Réponse

is anyone fix Input/Output error yet? Please help!!

jay zee - Réponse

Where can I download Mac OSX Leopard 10.5?

gitico2006 - Réponse

Thank you for the guide. My 2008 24 inch imac has been use as a paperweight for the past 4 years after the HD failed. I replaced it with a 27 inch imac, but I decided to have go at fixing the old one. I replaced the 320 WD HD with a WD 2 TB today. All went well until trying to reinstall the original OS (Snow Leopard) and could not get the computer to see the new HD. Your guide saved the day and now have the OS installed. Thanks again.

John Gardner - Réponse

wen i am installing asking the id & password, if i give new id it not accepting. i am totally struck please help me

Sathish m - Réponse

So you can't use a hard already in the Dell gx280? Or if you can does it delete all the information that you used before trying to install mac os on your Windows pc? Probably stupid but really curious? This dell has been a soldier for me but I'm not able to purchase a Mac right now and want that operating system so bad.

Ryan Ridgeway - Réponse

There is no normal way to install Mac OS on normal PC, for limits of Apple. You can Google "Hackintosh" for installing Mac OS on a Windows PC.

ycwei982 -

I am trying to re-install OS X Leopard onto a Macbook A1181 and can get to the picture in Step one less the HD option. When I click on the Install Disk the drive starts then the Laptop re-boots. It never gets to step two. I can hear the HDD spinning and have checked the RAM but do not know what to check next other than try checking the HDD to make sure it is good.

khutch9999 - Réponse

Hi,

I printed out this guide before I replaced my SSD, however the graphics for Steps 6 to 17 did not print - the graphics for Steps 1 to 6 were fine - any ideas to solve this issue?

Best wishes,

GaryB

Gary Brooker - Réponse

How would i do this without a functioning optical drive

James Reynolds - Réponse

Need some help. Installing High Sierra on my MacBook Pro Mid 2009 - did all the steps to put it on a brand new external drive. It is plugged into my computer, I can see the High Sierra install when it comes on and when I click it it goes to a grayish/white screen with a circle slash no symbol, like the ghostbusters, then use sits there and does nothing.

Robert Warfield Jr - Réponse

It’s normal, The minimum hardware requirement for High Sierra is a MacBook Pro Mid 2010.

So, go to make a new usb drive with Sierra.

Anthony Fassler -

In step 5 of this guide would it work to choose “Restore from Time Machine Backup” instead of “Reinstall macOS”, connect my Time Machine backup via USB and restore my HD? Or do I first have to install the OS on the new empty disc and then load my backup?

Stephan Gysi - Réponse

Ajouter un commentaire

Voir les statistiques:

Dernières 24 heures : 245

7 derniers jours : 1,478

30 derniers jours : 7,243

Total : 1,145,980