Aller au contenu principal

Removing factory feet from a Mac Laptop (Non-Retina)

Ce dont vous avez besoin

  1. Removing factory feet from a Mac Laptop (Non-Retina), Remove the bottom cover: étape 1, image 1 de 2 Removing factory feet from a Mac Laptop (Non-Retina), Remove the bottom cover: étape 1, image 2 de 2
    • I am using a 2011 13" MacBook Pro. Most machines are similar, but variations may exist.

    • If possible, disconnect the battery to protect your components once the bottom is removed.

    • Remove the bottom cover of your MacBook with the guide for your specific system.

  2. Removing factory feet from a Mac Laptop (Non-Retina), Removing failed feet: étape 2, image 1 de 3 Removing factory feet from a Mac Laptop (Non-Retina), Removing failed feet: étape 2, image 2 de 3 Removing factory feet from a Mac Laptop (Non-Retina), Removing failed feet: étape 2, image 3 de 3
    • Before removing the good feet, remove the failed feet first. These may come off without disassembly if they have fully failed.

    • After removing the damaged feet, remove the intact feet. Follow the disassembly guide for your specific Mac.

  3. Removing factory feet from a Mac Laptop (Non-Retina), (Full set replacement only) Removing intact feet: étape 3, image 1 de 3 Removing factory feet from a Mac Laptop (Non-Retina), (Full set replacement only) Removing intact feet: étape 3, image 2 de 3 Removing factory feet from a Mac Laptop (Non-Retina), (Full set replacement only) Removing intact feet: étape 3, image 3 de 3
    Outil utilisé dans cette étape :
    iFixit Opening Picks (Set of 6)
    $4.99
    J'achète
    • To remove the intact feet, score the internal plug. Once scored, remove the plug with a guitar pick.

    • After removing the inner plug, push the foot out with a spudger or screwdriver.

  4. Removing factory feet from a Mac Laptop (Non-Retina), Install the new feet: étape 4, image 1 de 2 Removing factory feet from a Mac Laptop (Non-Retina), Install the new feet: étape 4, image 2 de 2
    Outil utilisé dans cette étape :
    Adhesive Cleanup Kit (Set of 12)
    $4.99
    J'achète
    • If the adhesive ring remains, remove it first. Clean the chassis with denatured alcohol or adhesive cleaner.

    • After removing the old feet, install the new set onto the bottom cover.

    • Re-install the cover on the computer.

Ligne d'arrivée

4 autres ont terminé cette réparation.

Nick

Membre depuis le 11/10/09

89 634 Réputation

52 tutoriels rédigés

Équipe

Master Techs Membre de l'équipe Master Techs

Community

321 membres

1 513 tutoriels rédigés

0 commentaires

Ajouter un commentaire

Nombre de vues :

Dernières 24 heures : 5

7 derniers jours : 21

30 derniers jours : 88

Total : 4,510